Aquabeve IB215R POU Water Cooler Hot and Cold Black

The Aquabeve IW215R Filtration Cooler is a direct-plumbed hot and cold hydration solution built for offices, breakrooms, and commercial environments that require consistent filtered water without bottled supply. This model shares the same upgraded internal architecture as the IB215R; featuring stainless steel hot and cold tanks, a reinforced refrigeration system, and improved structural supports. Finished in a clean white exterior. The result is a reliable, low-maintenance point-of-use cooler that performs across both customer-facing and back-of-house environments.

• 2.0L / 0.53-gallon stainless steel hot tank with stainless steel fittings between the hot and cold tanks for durability and sanitation.
• 3.78L / 1.0-gallon polished stainless steel cold tank with laser-welded joints and seams for dependable chilled-water performance.
• "D" shaped copper evaporator tubing increases tank contact surface area to improve cold water performance and recovery.
• Evaporator copper tubing thickness increased by 33% to improve longevity and resistance to refrigerant leaks.
• Dispense point is 4 inches higher than previous configurations, providing easier bottle and cup clearance during use.
• Aluminum silicate fiber blanket insulation on the hot tank helps prevent dry burn and improves insulation efficiency.
• Upgraded internal supports improve structural durability and help reduce shipping and handling damage.
• Dual mechanical float system enhances reliability and water level control in direct-plumb applications.
• Larger rear cabinet opening allows easier chassis access for service and maintenance.
• No external base plate; updated lock-in baffle and baffle nut design provide improved internal stability.
• Clean white finish suitable for modern offices, retail environments, and commercial spaces. Cup dispenser optional.

Technical Specifications

• Product Type: Filtration water cooler, hot and cold (point-of-use)
• Model: IW215R
• Voltage: 110V / 115V / 220V
• Frequency: 50/60 Hz
• Power Consumption: 4.89A / 554W / 115V
• Cold Power Consumption: 1.44A / 118W / 115V
• Hot Power Consumption: 3.87A / 449W / 115V
• Energy Use: 0.86 kWh / 24 hrs.
• Average Hot Water Temperature at Nozzle: 167°F +/- 9°F cut-in / 187°F +/- 4°F cut-out
• Hot Water Flow Rate: 0.67 – 0.73 oz./sec
• Hot Tank Size: 2.0L
• Heat Band Wattage: 450W
• Average Cold Water Temperature at Nozzle: 45.87°F cut-in / 42.2°F cut-out
• Cold Water Flow Rate: 1.4 oz./sec
• Cold Tank Size / Usable Volume / Below Baffle Volume: 3.78L / 2.08L / 1.51L : 1 gal. / 0.55 gal. / 0.4 gal.
• Unit Dimensions (W x D x H): 12.4 x 13.78 x 42.91 inches
• Boxed Dimensions (W x D x H): 13 x 13.9 x 43.9 inches
• Net Weight: 31 lbs.
• Gross Weight: 33 lbs.
• Dispense Height: 32.5 inches
• Max Distance from Drip Tray to Faucet: 7.8 inches
• Certifications & Standards
• The IW215R is third-party safety certified through Intertek and carries the eTL Listed mark, confirming compliance with applicable North American electrical product safety standards.

Use Cases

• This filtration water cooler is well-suited for:
• Office environments and breakrooms requiring a direct-plumbed, bottle-free hydration solution.
• Healthcare, wellness, and waiting-room spaces where consistent, filtered hot and cold water access is required.
• Retail and customer-facing environments that benefit from a clean, modern aesthetic and continuous water supply.
• Commercial and light industrial spaces where eliminating bottled water handling improves operational efficiency.
• Workplace hydration programs transitioning from bottled systems to point-of-use filtration.

Compatibility - The IW215R is designed for direct water line connection and is compatible with standard point-of-use filtration setups. Installation requires connection to a potable water supply. Filtration components are typically installed inline based on site requirements. An optional cup dispenser is also available.

Need help confirming compatibility? - Contact your HHD representative by phone or via the Customer Support chat on your screen.

Certifications and Compliance - The ETL Listed mark indicates the product has been tested by Intertek and found in compliance with accepted national standards. The unit's stainless steel hot and cold tanks, dual mechanical float system, and reinforced evaporator tubing support dependable long-term operation in commercial beverage and workplace hydration environments.

Warranty - Models IB215R and IW215R include a 3-year warranty on the sealed refrigeration system and a 2-year warranty on parts, including electrical components such as cold controls, relay overloads, and PCBs.